Evolveo StrongVision A, Manual

Page: 64 / 192

64
3.4 The camera cannot be turned on
1. Check that the batteries are charged and of the same type and
manufacturer.
2. Check that the batteries are inserted exactly as indicated by the
pictograms in the battery compartment.
3.5 The camera does not capture photos or videos
1. Check that the SD card is of maximum capacity of 32 GB or lower and
that it is Class
10.
2. Test if the SD card works in another device.
3. Format the SD card in a computer to the FAT32 file system.
3.6 The camera does not capture photos or videos at night, but only
during the day
Check the battery level; if the battery level is below 30 %, the camera is
unable to turn on the night illumination. To restore the function, replace
the batteries with new fully charged batteries.
4. Notice
4.1 When you switch the camera from the TEST mode to the ON mode,
the countdown from 15 s to 1 s starts. This
is normal and during this
time you can safely close the camera and place it in the desired place.