25
8.Taking photographs
For checking if the camera is in the mode for taking photos unscrew the back cap (3) and check if
the modes switch (4) is on the left in the photo position and then screw the cap back on. After
turning the camera on the blue LED diode will go on and the camera will switch to the stand-by
mode. Press the Power/Shutter button to start taking photos, the red LED will blink. Press the
Power/Shutter button again to stop taking photos. In photo mode the camera will take sequentially
photos every 3 seconds. It stops automatically if the battery is empty or if the micro SD card is full.
9.Playing back in a PC
Turn off the camera. Screw the back cap (3) and switch the modes switch to the right to the video
mode. Connect the camera with your computer via USB cable from the USB port and turn the
camera on. The camera will be recognized automatically as USB Device. Or you can take out the
micro SD card and use your own card reader to connect with your computer too.
The device must be turned on while connected with computer for data download.
Don’t remove the battery! When you remove the battery while the video is
playing, the damage to your video data could occur!
10.Playing back in a MAC
Turn off the camera and plug it into your MAC with the included USB cable. Turn the camera on,
and the MAC OS will recognize the camera as an external hard drive.
IMPORTANT TIP FOR MAC USERS
When deleting files from your Micro SD cards you must empty the trash before removing it or
unplugging the camera. If you do not empty your trash the photos and videos files will not be
completely erased from your cards.
11.Webcam Function
IT is not necessary to install the driver to view videos or pictures. The driver is only necessary to
install when using the camera as a webcam which is available for Windows OS system only. The
driver can be found on
www.evolveo.eu
12.Overview of status LEDs
Overview LED indicator
Green LED
Red LED
Blue LED
Standby
off
off
on
Battery charging
on
off
off
Taking video
off
flashing
on
Taking photo
off
flashing
on
Low battery
off
alternately flashing
Micro SD card fill up
off
on
on
Data transfer
off
off
on
NOTE - THE SPECIFICATION IS SUBJECT TO CHANGE WITHOUT NOTICE
