24
4.Charging the battery
Screw out the back cap located at the back of the camera (3) and plug the USB charger to the
camera. The green light is on while charging, it goes off when the battery is fully charged. On the
first time charge the battery 10 hours before use! You can record up to 60~70 minutes with one
charge.
Camera On/Off
Turning on the
camera
Turn on the camera by pressing the Power/Shutter button for at least 3
seconds until the blue LED turns on. After releasing the button the
camera vibrates, indicating that it is in the standby mode.
Turning of the
camera
You will turn the camera off by pressing long the same button for next 3
seconds. The camera will vibrate twice, which serves as the confirmation
of turning off.
5.Set date & time
Download the "time.txt" from
www.evolveo.eu
. Open the file “time.txt” and change the date &
time as follows:
YYYY.MM.DD hh:mm:ss
Y = year
h = hour
M = month
m = minute
D = day
s = second
Then copy the file to memory card! Now you can take a photo or video to test it.
6.Saving the MicroSD / MicroSDHC card
Don’t forget to insert the memory card MicroSD/MicroSDHC type into the camera before
recording or taking the photos.
Overview of storage capacity
Mode
Digital photography
HD video recording
4GB
8GB
16GB
32GB
4GB
8GB
16GB
32GB
720p
450
850
1700
3500
55 min 115 min
230 min
450 min
1080p
45 min
90 min
180 min
350 min
7.Recording a Video
For checking if the camera is in the mode for recording the video unscrew the back cap (3) and
check if the modes switch (4) is on the right in the video position and then screw the cap back on.
After turning the camera on the blue LED diode will go on and the camera will switch to the stand-
by mode
.
Press the Power/Shutter button shortly to start a video recording. The red LED will blink
while the video is recording. Press the Power/Shutter button again to stop recording.
