Clean the Rolling Brush
Clean the Side Brushes
Replace the Side Brushes
Pull on the release tabs to unlock the brush guard as shown.
Reinstall the rolling brush by inserting the fixed protruding
end first and then clicking into place.
Press down to snap the brush guard into place
Clean the rolling brush with the provided cleaning tool or a
vacuum cleaner.
Lift the rolling brush to remove.
Foreign substances, such as hair, can easily get tangled in the
side brushes, and dirt may adhere to them. Be sure to clean
them regularly
Remove the side brushes
Carefully unwind and pull off any hair or string that is
wrapped between the main unit and the side brushes
Use a cloth dampened with warm water to remove dust
from the brushes or to gently reshape them.
Only use the side brushes when completely dried.
The side brushes may become bent or damaged after being
used for a period of time. Follow the instructions below to
replace them
Pull off the old side brushes and snap the new ones into place
1
4
5
2
3
1
2
3
1
4
5
2
3
T
14
