4.6 CTCSS (Continues Tone Coded Squelch System)
Press the MENU button twice, the current CTCSS code will flash on the display. Press the
up
▲
/down
▼
button to change the 38 available codes.
Press the PTT button to confirm and return to stand-by mode.
License free radio’s operating on the 400-470MHz frequency band, the device has 8
available radio channels. If there are many device users near you, there is a chance that
some of the users are operating on the same radio channel.
When using CTCSS, a low frequency tone (between 67-250Hz) will be transmitted along
with the voice signal. There are 38 available tones to choose form.
You are free to choose one of the 38 available sub-channels. Due to filtering, these
sub-channels will generally not be audible so they will note disturb the communication.
4.7 DCS Sub-channels
The device comes with 83 DSC sub-channels on each main channel.
Press the MENU button 3 times, the current DCS code will flash on the display. Press the
up
▲
/down
▼
button to change the 83 available codes. The default DSC code is closed.
4.8 VOX (Hands free function)
Press the MENU button 4 times, the current VOX setting will flash on the display and the
VOX icon will display,
Press UP
▲
button to set the VOX sensitivity level between 1 and 3 level (level 3 is the high
sensitive level).
Press down
▼
button until “OF” appears on the display to turn VOX OFF.
Press the PTT button to confirm and return to stand-by mode.
In VOX mode, the radio will transmit a signal when it is activated by your voice or other
sound around you.
VOX Operation is not recommended if you plan to use your device in a noisy or windy
environment.
Note: VOX mode will be over ride when you press the PTT button.
4.9 Setting the Call tones
The device has 10 call tones.
Press the MENU button 5 times, “CA” is displayed and on the current call tone.
Press the UP
▲
/Down
▼
button to change another call tones.
Press the PTT button to confirm and return to stand-by mode.
4.10 Key Tone On/Off
You can on/off the key tone when press the buttons.
Press the MENU button 6 times, “KO” will be displayed.
Press the UP
▲
/Down
▼
button disable the key tone ON/OFF.
Press The PTT button to confirm your selection and return to the stand-by mode.
4.11 Roger Beep On/Off
After the PTT button us released, the device will send out a roger beep to confirm that have
stopped talking.
1,Press the MENU button 7 times, “RO” will be displayed.
2,Press the UP
▲
/Down
▼
button disable the roger beep ON/OFF.
3,Press The PTT button to confirm your selection and return to the stand-by mode.
Summary of Contents for FreeTalk 2W
Page 1: ...MANUAL MODEL FreeTalk 2W...