HD Install
The system may not include hard disk depending on the kit you selected. The NVR works most
3.5" SATA HDD or 2.5"SATA HDD
1.
Unplug your NVR from power, unscrew and remove the top cover.
2.
Connect the SATA power and data cables from the NVR to the corresponding ports on
your HDD (as shown).
3.
Holding the hard drive and the DVR, gently turn it over and line up the holes on the hard
drive with the holes on the NVR. Using a screwdriver, screw the provided screws into the
holes and assemble the cover.
Note
：
New HDD have to be formatted before recording.
