NVR
1.
WIRELESS Antenna Ports:
Double antennas to WIRELESS range
2.
WAN Port:
Connect your NVR to Internet
3.
VGA Port:
For viewing on VGA monitor
4.
HDMI Port:
For viewing on HDTV
5.
USB Ports:
For mouse and backup
6.
Power Input
IPC
1.
WIRELESS antenna:
Wireless connection with NVR
；
2.
DC Port:
input power 12V 1A;
3.
RJ45 Port
：
For matching code and wired connection between IPC and NVR.
Anyway, there is range limitation for the wireless signal from NVR. When cameras
are out of this range, they can't be connected to NVR wirelessly. Then users can
use network cable to connect cameras and NVR.
4.
Reset button:
Press reset button for 5 seconds to restore factory setting and enter
into matching‐code mode.
5.
Status light:
Unbright: IPC system is not ready or abnormal
Flash: IPC is in the code‐matching state
Long time bright :IPC and NVR have been coded, the connection status is normal
Slow Flash : IPC is coded with the NVR, but the connection is disconnected
Note: In night vision mode, the device is normal and the indicator light will be
IPC without RJ45 connector
IPC with RJ45 connector
