Evolveo CARCAM F140, User Manual

Page: 58 / 61

58
- Language: Press the button "
◄
/
►
" to select the
desired language, then press OK button to confirm and
return to the previous menu.
- TV Out: NTSC / PAL
- Format: Press the button "
◄
/
►
" to select "Yes", and
then press OK button to start formatting the memory
card; when "No" is selected, press OK button to exit the
settings menu.
- Restore factory settings => Reset to Defaults
- System Information => Show Software Release
- Card Information => Show information about the card
7. Playback

Select the icon "Playback" and press OK button to enter the
following settings:
- Press the OK button to enter the playback mode, then
use the Up and Down buttons to select either play video
files or photos. Then again, Up and Down buttons to
select the file you want to view and confirm with OK
button. After the playback, press MENU to return.
- Delete file: When you play and go through the files, press
the OK button for 2 seconds, then use the Up or Down
buttons to select whether the file should be deleted or
locked and protected against deletion.
- The EVENT folder contains video files protected against
overwriting.
8. Connecting the camera to a PC
When switched on, connect your camcorder with a computer by
the USB cable. The display shows the menu with a choice of
MSDC, i.e USB drive mode and the other as a PC-CAM mode, i.e
Web camera mode. Press the button "
◄
/
►
" to select the PC-
CAM or NSDC and then press OK button to switch to the selected
mode. Click on the icon AMCAP to use your computer as a digital
still camera.