Evolveo CARCAM F140, User Manual

Page: 56 / 61

56

Before using the card, it is recommended to format the
card. See „System settings“. (Data stored on the card will
be deleted when the card is formatted).
3. Charging:

Connect the device to your computer using a USB data cable
for charging.

To charge by a battery charger, connect the USB cable to
the charger and then plug the charger into an electrical
outlet.

The charging indicator lights up blue. When the battery is
fully charged, the blue light goes out.

The first three charging perform when the battery is
completely discharged and then recharge 12 hours at a
time, until it reaches the maximum of the battery charge.
4. Operation and recording

After turning on the device, press the OK button for
recording / REC in the upper right corner of the screen
flashing "REC" - red icons video. The device is in the record
mode. The camcorder automatically stores one video file
every 2/5/10 minutes (according to the settings,
recommended length is five minutes) to the video folder.
When the card is full, the device automatically deletes the
first file in the folder in order to get room for cyclic
recording video.

If you connect off camcorder to the car charger, the camera
will automatically start recording cycle.

Most modern cars have a car charger set so that the camera
turns on, when you start the car and when the engine is
switched off, the camera turns off at a preset time. See
Menu> Off Delay, recommended setting delay time is 5
minutes.

While recording video and you press button "
◄
up / left"
,the upper left corner of the screen displays a lock icon,
which means that the recorded file is locked and saved in
the EVENT folder. This folder is not overwritten with
cyclical recording and the file is automatically protected