7
Subwoofer Rear-Panel Controls and Connections
1.
DC 15V
- Connect the DC 15V jack to the 15V AC/DC mains adaptor. Please connect the jack to
the rear of the soundbar before switching on the power at the mains.
2.
DC Power Switch
- This is the switch which controls the mains power to the subwoofer. Switch
it on when using the soundbar system. It will automatically enter into the power saving
mode after 1 minute if the soundbar is not being used . The red light flashes once every five
seconds. It is recommended to switch the power off if you don’t plan to use the soundbar
system for a long period of time.
3.
USB charger port
- Use this port to charge your wireless headphones.
4. Pairing button
- This button is only required if your wireless connection between your soundbar
and subwoofer should drop. If this happens then follow these simple instructions:
- Hold the pairing button on the subwoofer for 2 seconds to start pairing it with the soundbar.
- Then touch and hold the wireless icon on the soundbar for 2 seconds to complete the pairing
process.
NB:The subwoofer & soundbar are pre-paired in the factory. Pairing is only required if the connection is lost
and the wireless indicator on the soundbar control panel remains flashing.
