-
S
7
www.evolutionbuild.com
Designed to cut:
Mild steel Plate -
Max Thickness 6mm
Mild steel Box section:
Max Wall Thickness 3mm
aluminium & Wood:
Max section 60mm x 220mm
Motor (230V ~ or 110V ~ 50/60 Hz) (Watts)
1500W
RPM no load (min
-1
)
3000
Recommended Maximum Duty Cycle
30 minutes
Weight
14.6Kg
Blade Dimensions
Diameter
(81/2”) 210mm
Bore Diameter
(1”) 25.4mm
Thickness
1.7mm
Maximum Cutting Capacity
Mitre
Bevel
Max Width
of Cut
Max Depth
of Cut
90˚
90˚
220mm
60mm
45˚L / 45˚ R
45˚
140mm
35mm
45˚L / 45˚ R
90˚
140mm
60mm
90˚
45˚
220mm
35mm
110V nOIse anD VIBRaTIOn DaTa
sound Pressure level (Under load) lPa:
87.18db(A) K=3dB(A)
sound power level (Under load) lWa:
98.18db(A) K=3dB(A)
Vibration level (Under load):
1.952m/s
2
K=1.5m/s
2
230V nOIse anD VIBRaTIOn DaTa
sound Pressure level (Under load) lPa:
94.04db(A) K=3dB(A)
sound power level (Under load) lWa:
107.04db(A) K=3dB(A)
Vibration level (Under load):
3.050m/s
2
K=1.5m/s
2
The declared vibration total value has been measured in
accordance with a standard test method and may be used
for comparing one tool with another. The declared vibration
total value may also be used in a preliminary assessment
of exposure.
WaRnInG:
The vibration emission during actual use
of the power tool can differ from the declared total value
depending on the ways in which the tool is used. The need
to identify safety measures and to protect the operator are
based on an estimation of exposure in the actual conditions
of use (taking account of all parts of the operating cycle, such
as the times the tool is switched off, when it is running idle,
in addition to trigger time).
aDDITIOnal aCCessORIes
In addition to the standard accessories supplied with this
machine, other accessories are available to improve its
performance, these include the following items:
1. Clamping System – the design of this machine allows for
the use of one or two hold down clamps (please note that
one hold down clamp is provided with the machine). Extra
clamps are available as optional accessories.
2. Diamond Blade – Convert this machine to a ‘Tile Cutter’.
By replacing the standard TCT Blade with the optional
Diamond Blade, this machine becomes a tile cutter – suitable
for most ceramic / porcelain tiles.
additional accessories include a dust bag, long
workpiece supports, repeat stop, front clamp, diamond
blade and a mitre saw stand. all can be purchased by
visiting www.evolutiononlineshop.co.uk today!
Your Evolution Power Tools product is shipped complete.
Remove all contents from the box and inspect to ensure no
damage was incurred during shipping, and that the items
listed below are included.
Description
Quantity
Instruction Manual
1
Hex Key
1
Hold Down Clamp
1
Multipurpose Blade
1
asseMBlY
GB
RaGe3-s sPeCIfICaTIOns
GB