Evolution GEN2800BEU, Manual

Page: 16 / 151

129 www.evolutionpowertools.com
®
SV
SK
RU
PT
PL
NO
NL
IT
GB
FR
FI
ES
EL
DE
DA
CZ
off on
on off
Note: In an emergency situation the generator can be shut down by
turning the ignition switch to the ‘OFF’ position. This is not advised
in general use as it can damage the device if repeated often.
MAINTENANCE
Note: The maintenance schedule for the Evo-System Engine can
be found in the dedicated Instruction Manual.
Generator
• Keep the generator clean and regularly check the tightness of all
bolts and fastenings.
• Keep the annular rings scrupulously clean and free from debris
(Engine & Accessory). (Fig. 6)
• Keep the 3 locating pins and 2 stabilising pins clean and
occasionally spray coat with a silicone oil based spray.
(Fig. 7)
• Keep all Uni-coupling mating surfaces clean and free from dirt
or debris.
• At every connection or disconnection check the accessory drive
cog for dirt or debris contamination, particularly between the teeth.
Clean and lubricate as per the instructions for the engine drive
clutch (found in the Engine Instruction Manual).
• Whenever the accessory is ‘remote’ from the engine the coupling
protection cover (provided) should be used to protect the coupling.
• Do not spray oil onto the cog teeth.
ENVIRONMENTAL PROTECTION
Waste electrical and mechanical products should not be disposed
of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice
Fig. 5
Fig. 6
Fig. 7