Evolution EVOSAW 185 Original Instructions Manual Download Page 3

3

www.evolutionpowertools.com

EN

INTRODUCTION

(1.2)

 This instruction manual was  

originally written in English.

(1.3)

 

IMPORTANT

Please read these operating and safety 
instructions carefully and completely.  

For your own safety, if you are uncertain 
about any aspect of using this equipment 
please access the relevant technical 
helpline, the number of which can be 
found on the Evolution Power Tools 
website. We operate several helplines 
throughout our worldwide organization, 
but technical help is also available from 
your supplier.

WEB: www.evolutionpowertools.com

(1.4)

 

Congratulations on your purchase

of an Evolution Power Tools Machine.
Please complete your product registration 
‘online’ as explained in the A5 online 
warranty registration leaflet included with 
this machine. You can also scan the QR 
code found on the A5 leaflet with a Smart 
Phone. This will enable you to validate your 
machine’s warranty period via Evolution’s 
website by entering your details and thus 
ensure prompt service if ever needed.
We sincerely thank you for selecting a 
product from Evolution Power Tools.

EVOLUTION LIMITED WARRANTY

Evolution Power Tools reserves the right to 
make improvements and modifications to 
the product design without prior notice.
Please refer to the warranty registration 
leaflet and/or the packaging for details of 
the terms and conditions of the warranty. 
The warranty below is applicable to 
machines destined for the UK mainland 
market only. Other markets may have 
specific requirements, additions or 
exclusions applied. Consult your dealer 
for details of the warranty applied to your 
area/country. Evolution’s warranty is in 
addition to your statutory rights.

(1.5)

 

Evolution Power Tools will, within the 

warranty period, and from the original date of 
purchase, repair or replace any goods found to 
be defective in materials or workmanship. 

This warranty is void if the tool being returned 
has been used beyond the recommendations 
in the Instruction Manual or if the machine 
has been damaged by accident, neglect, or 
improper service.

This warranty does not apply to machines and 
/ or components which have been altered, 
changed, or modified in any way, or subjected 
to use beyond recommended capacities 
and specifications. Electrical components 
are subject to respective manufacturers’ 
warranties. All goods returned defective shall 
be returned prepaid freight to Evolution Power 
Tools. Evolution Power Tools reserves the right 
to optionally repair or replace it with the same 
or equivalent item.

There is no warranty – written or verbal – for 
consumable accessories such as (following list 
not exhaustive) blades, cutters, drills, chisels 
or paddles etc.  In no event shall Evolution 
Power Tools be liable for loss or damage 
resulting directly or indirectly from the use 
of our merchandise or from any other cause.  
Evolution Power Tools is not liable for any 
costs incurred on such goods or consequential 
damages. No officer, employee or agent of 
Evolution Power Tools is authorized to make 
oral representations of fitness or to waive any 
of the foregoing terms of sale and none shall 
be binding on Evolution Power Tools.

Questions relating to this limited warranty 
should be directed to the company’s head 
office, or call the appropriate Helpline 
number.

Summary of Contents for EVOSAW 185





























































Reviews: