background image

7

www.evolutionbuild.com

safeTy RUles fOR belT sanDeRs

UK

a)

 

always remove the plug from the 

outlet socket before carrying out any 
adjustments, maintenance or servicing.
b) a damaged supply cord must be 
replaced by a qualified technician.
c) Do not use this sander for ‘wet sanding’. 

There is a significant risk of electric shock if 
this sander is used for ‘wet sanding’.

d) Wear appropriate PPe (Personal 
Protection equipment). 

A dust mask and 

safety glasses should always be worn when 
using this tool. Additional safety equipment 
such as ear defenders, gloves, safety shoes 
and overalls should employed as necessary.

e)

 

Inspect the workpiece for screws and 

nails etc.

 Remove these before operations 

are attempted.

f) Only use sanding belts that are in good 
condition.

 Do not use worn out, ripped or 

damaged sanding belts.

g)

 

Where-ever possible the workpiece should 

be securely clamped to prevent movement.
h)

 

The Mini belt sander is designed to be 

held with one hand so that it can be run 
over the workpiece in a linear fashion. 

Do not attempt to clamp the Mini Sander to a 
workbench or similar in an attempt to mimic 
a fixed sanding machine.

i) Do not apply excessive force to the 
machine in an attempt to slow it down 
quickly after ‘switch off’. 

Allow the belt to 

slow down and stop naturally.

j) Do not eat or drink in the work area.

 The 

sanding process can create dust that may 
remain within the work area for quite long 
periods. Eating and drinking in such areas can 
be harmful to health.

k) If possible seal off the work area so that 
dust is contained within the area.

 Dust will 

settle and can be removed at a later date.

l)

 

People entering the work area should 

wear the appropriate PPe.

 Do not allow 

casual visitors to enter the work area.

labels & syMbOls

UK

WaRnInG: 

Do not operate machine 

if warning and/or instruction labels 

are missing or damaged. Contact Evolution 
Power Tools for replacement labels.

symbol

Description

V

Volts

A

Amperes

Hz

Hertz

Min

-1

Speed

~

Alternating Current

n

o

No Load Speed

Double Insulated

Wear Safety 

Goggles

Wear Ear Protection

Summary of Contents for EVOMBS280













Reviews: