www.evolutionsteel.com
9
Maintenance & Troubleshooting
Keep tool, cord, and carry case clean and free from chips.
Avoid using cleaning products, which include benzene,
trichloroethelene, chloride, or ammonia as these can damage
plastic parts. In case of electrical or mechanical malfunction,
immediately switch off the tool and disconnect the plug.
Excessive sparking may indicate the presence of dirt in
the motor or worn out carbon brushes. Check for wear and
replace when they reach 1/4” (6mm). For all other service
take machine to your local dealer, or to Evolution Power
Tools USA, Iowa, if bought in the USA.
Lubrication
Your machine gearbox is lubricated at the factory. To check
and / or add lubricant, it is necessary to dismantle the tool.
This operation should always be handled by the nearest
SERVICE CENTER or Evolution Power Tools USA, Iowa,
if in the USA. All repairs and servicing made by these
centers are fully guaranteed against defective materials and
workmanship.
40T
9” (230mm) TCT Wood Blade
48T
9” (230mm) TCT Mild Steel Blade
60T
9” (230mm) TCT Stainless Steel Capable Blade
80T
9” (230mm) TCT Aluminium Blade
Notice:
Fair wear and tear and damage caused by misuse is not
covered under the 12-Month guarantee
.
Recycle unwanted materials instead of disposing of them
as waste. All tools, hoses and packaging should be sorted,
taken to the local recycling center and disposed of in an
environmentally safe way.
Recyclable Materials Analysis List
Material
Weight(Kg)
Percentage (%)
Aluminum
1.94
24.40
Cast Iron
0.0
0.00
Iron Plate
3.61
47.00
Plastics
1.96
25.70
Others
0.10
1.30
Total
7.61
Major Packaging Materials
Material
Weight(Kg)
Carton
1.23
Polystyrene
0.0
Plastic
4.50
Polypropylene
0.001
Others
0.0
Total
5.731
EVOLUTION BLADE ACCESSORIES
MAINTENANCE
ENVIRONMENTAL PROTECTION