www.evolutionsteel.com
5
WARNING!
Do not operate machine if warning and / or instruction labels
are missing or damaged. Contact evolution power tools for
replacement labels.
Symbol
Description
V
Volts
A
Amperes
Hz
Hertz
Min
Minutes
~
Alternating Current
No
No Load Speed
Double Insulated
Only use genuine Evolution replacement blades.
Unauthorized blades may be dangerous! Keep saw blades
securely fastened. Check blade flanges for debris before
installing any new blade. Do not use dull or broken blades.
Check blades often for condition and wear. Damaged or
worn blades should be replaced immediately. Check chip
collector cover for proper fit to minimize the risk of flying
debris. Loose fitting or damaged collector must be replaced
immediately. Beware of ejecting chips as they may be HOT.
Always make provisions for safe handling of excess material.
Keep bottom of base plate free from dirt and other debris.
To obtain an additional copy of your manual, please
contact Evolution Power Tools at :
UK
0870 609 2297
USA 1-866-EVO-TOOL
WEB www.evolutionpowertools.com
a) DANGER:
Keep hands away from cutting area and the
blade. Keep your second hand on auxiliary handle, or motor
housing. If both hands are holding the saw, they cannot be
cut by the blade.
b)
Do not reach underneath the workpiece. The guard cannot
protect you from the blade below the workpiece.
c)
Adjust the cutting depth to the thickness of the workpiece.
Less than a full tooth of the blade teeth should be visible
below the workpiece.
d)
Never hold piece being cut in your hands or across your
leg. Secure the workpiece to a stable platform. It is important
to support the work properly to minimize body exposure,
blade binding, or loss of control.
e)
Hold power tool by insulated gripping surfaces when
performing an operation where the cutting tool may contact
hidden wiring or its own cord. Contact with a “live” wire will
also make exposed metal parts of the power tool “live” and
shock the operator.
f)
When ripping always use a rip fence or straight edge
guide. This improves the accuracy of cut and reduces the
chance of blade binding.
g)
Always use blades with correct size and shape (diamond
versus round) of arbour holes. Blades that do not match the
mounting hardware of the saw will run eccentrically, causing
loss of control.
h)
Never use damaged or incorrect blade washers or bolt.
The blade washers and bolt were specially designed for your
saw, for optimum performance and safety of operation.
SPECIFIC SAFETY RULES & SYMBOLS
ADDITIONAL SPECIFIC SAFETY RULES