©
E
v
o
lu
tion
C
o
n
tr
o
ls
I
n
c
.
10
-S
e
p
t-
2020
EVO/
™ECM-Modbus RTU
Series 2
Page 33
Application Guide
©2020 All Rights Reserved
Evolution Controls Inc.
San Diego, CA USA
11.
Power cycle the gateway and wait until boot-up is complete. The new IP address is
now in use.
B.
Changing PC’s IP Address
If your PC is not connected to a network or network is not available, you will need
to change your PC’s IP address to access the gateway’s website
to configure its
network settings
1.
Connect an ethernet cable directly between the PC
’s network port
and the
gateway
2.
Enter “
ncpa.clp
” in the search box in the task bar to laun
ch the
Network
Connections
explorer
3.
Double click the
Unidentified network
to launch its
Status
dialog and click the
Properties
button to launch the
Properties
dialog.
The actual name “
Ethernet
3
” of the network interface may be different in differe
nt computers.
