MaxBAR 210 Manual Ver. 1.00
Page
13
Set up
o
Control panel
The control board offer several features: you can simple set the starting address, run the pre-
programmed program or make a reset.
The main menu is accessed by pressing the Menu button, Browse through the submenu by pressing
Up or Down. Press the Enter-button in order to select the desired menu. You can change the
selection by pressing Up or Down, confirm every selection by pressing the Enter-button. The
functions provided are described in the following setting.
Item
Menu
Sub-menu
3
rd
-menu
Function
Description
STATIC
Red
Static color
setting
Green
Blue
Strobe
AUTO
Auto effect 1
Auto effect
choosing
Auto effect 2
Auto effect 3
Auto effect 4
Auto effect 5
DMX
Address
code setting
PERS
3CH
DMX
channel
mode
setting
9CH
4CH
5CH
6CH
SETTING
Restore factory
setting password
is
UP+DOWN+UP+
DOWN
Reset
Reset and
DIM setting
DIM1~8
o
Auto Mode
Press the
MENU
until it shows
AUTO
.
Use the
UP/DOWN
buttons to set to
At1 > At5
,
Press
ENTER
to confirm.
o
DMX Mode
DMX mode is selected in the main menu.
You can control the projectors individually via your DMX-controller
Just select the fixture address, knowing that this address will be the start address. (1
st
DMX channel).
