Infinium 2200 RGB User Manual Ver. 1.00
Page 14
of several W.cm-2 applied for a few seconds.
The access to the laser emission zones should be reported using the signs in accordance with the Ministerial
Decree of 4 November 1993 "Signs of safety and health in the workplace" and the NF X 08-003 "Symbols
graphics and symbols - colors and safety signs "of December 1994. This signaling is completed by the words
of the class of laser product and the instructions provided in the NF EN 60825-1 standard. Such access can
be controlled, at least when lasers are operating.
Emissions control: the control panel should be placed outside the locations exposed to hazardous emissions.
The control of lasers in Classes 3 and 4 should be under the control of a key control, removed when the
device is not in use and owned by a qualified person.
Disclaimer: The use of this device is exclusively for professional activities show and display.
It is forbidden to allow projecting the beams to the audience and any areas accessible by persons without
appropriate eye and skin protective items. It is forbidden to use this device for any other purpose than that
for which it is intended.
It is forbidden to shine any laser beam to the aircrafts.
If the laser is operated in a situation where health or property injury may occur, operation MUST be stopped
immediately!
Manufacturer and distributors are not responsible for any damages caused by use of EVOLITE lasers. User is
responsible for applying conditions of use according to regulations stipulated in in EN60825-1:2014 ,application
of the European Directives :
Directive LVD n°2006/95/CE
Directive RoHS 2 n°2011/65/UE
Directive EMC n°2014/30/EU
DANGER
AVOID EYE EXPOSURE TO DIRECT OR SCATTERED RADIATION
DANGER
AVOID SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION