4
25
O
The card that has just been printed is hot
O
Standard contrast not yet reached
O
Still too soon to re-print the card
If you re-print a card while it is still hot, there is a risk that it will
not be fully erased. It is advisable to wait until the light goes
out. This does not stop another card being re-printed.
O
There are no cards in the card feeder
O
Incorrect card thickness adjustment
O
& ]
O
The cards are stuck together
O
&
Check the condition of the cards in the feeder, and that the
control button for one second. Printing restarts.
O
The printer is waiting for a card to be inserted.
The printer is in manual card feeder mode - insert a card into
the printer. Refer to section 1 “Getting started”.
CARD TIME DELAY
NO CARDS OR NO
CARD FEEDER
WAITING FOR A
CARD
O
The printer cover is open.
Close the cover – the printer will restart.
PRINTER COVER
OPEN
