Diagram
1. Diodes
2. Nozzle
3. Socket DMX 3-pin
4. Display
5. S5 needle socket
6. Socket DMX 5-pin
7. Power socket
8. Power switch
9. Fixed plate
10. Oil Tube
11. Fluid tank
12. Wind inlet
13. Handle
14. Hanging ring
Fog machine fluid blowout and heater blocking phenomenon analysis
Please use the original consumables, protect your health and life of machine
A. Fluid injection trouble: Refers to the fog fluid atomizing in the heater pipe of the machine
is not good, heater temperature cannot be timely and effective transmit to the fog fluid, fog
fluid cannot all atomization and lead to fluid injection.
First reason: Using the low quality or counterfeit fog fluid, low quality fog fluid have more
impurities, easy to adhere to the pipe wall and hindered.
First reason: Using the low quality or counterfeit fog fluid, low quality fog fluid have more
impurities, easy to adhere to the pipe wall and hindered temperature transmission result in
incomplete atomization caused fluid injection.
Second reason: using an incorrect fog fluid. Different fog fluid have different required
atomization temperature. If you use the wrong fog fluid result in oil cannot fully atomization
caused oil injection.(fig 1)
B. Heater blocking trouble
：
poor atomization fluid injection is the early signs of heater
block. Using poor quality fog fluid or not timely maintenance cleaning the fog machine for a
long time. Inevitable will appear the terminal symptom of heater blocking.
