After setting the above color, the LED will show the corresponding color when press the
button A on the remote(CH-1 matches with button A).
c). Under Random mode, the LED will change color freely, the interval is 1s.
Note: Under DMX control, the LED's color would be controlled by DMX controller instead of
this color setting page.
3
、
There are four color standby modes, namely CH-1, CH-2, CH-3 and CH-4. Different
channels match with different button on the wireless remote.
4
、
No-fluid protection setting page
When it shows OIL, press ENTER button to set the status of low-fluid protection.
Press UP button, it will show ON. This means that the low-fluid protection function is
activated. Press DOWN button, it will be OFF. This means that low-fluid protection function
is shut off. After setting, press ENTER button again to exit to page OIL.
Machine’s functions
This machine supports wireless remote control, DMX control, fluid sensor, stop immediate
function and LED lights (3W LED, 21 in total). DMX control is prior to wireless remote
control. Fog duration is about 7S.
1
、
LED lights instruction
LED lights are controlled by the digital display and DMX.
2
、
Under wireless remote control, LED color is set according to the digital display. The LED’s
on/off synchronize with the Fog’s on/off.
3
、
Under DMX control, fog and LED are separate. It has 11 channels to control the effects of
LED lights. Please refer to below DMX instruction for the details.
4
、
DMX instruction
Total 8 DMX channels as below:
Channel 1: Fog (0-9) OFF, (10-255) ON.
Channel 2: LED red, (0-9) OFF, (10-255) 0-100%.
Channel 3: LED green, (0-9) OFF, (10-255) 0-100%.
