2 Press "ENTER
”
button, and' Software" or
“
Fix times
”
Will be Showed Then press
ENTER. and you can see three items as below:
1) Software - This item displays the Software information
2) Hardware - This item displays the Hardware information
3) Fix times - This item displays the working hours about the light
AUTO
-In this menu. you can select desire AUTO mode and adjust the running speed
1 Press "ENTER" button and then up or DOWN button until
“
AUTO" is showed
2 Press "ENTER" button and "SPEED' or
“
AUTO MODE
”
will be showed Then press ENTER, and
you can see two items as below:
1) SPEED - You can select desired speed in this menu
2) AUTO MODE - You can select your desired auto mode this menu
CUSTOMER
-In this menu. You can select the AUTO program edited in the
“
EDIT" menu
1 Press "ENTER" button and then up or DOWN button until
“
CUSTOMER" is showed
2 Press "ENTER" button. and there are II pre-programmed mode edited in the "EDIT
”
menu
CAL WHITE In this menu. you can adjust the value of II different white color
1 Press "ENTER" button and then up or DOWN button until
“
CAL WHITE" is showed
2 Press "ENTER" button, and there are II pre-programmed White colors that can be edited by
adjusting the value of "Red". :Green", "Blue
”
and
“
White
”
STAT COLOR
-In this menu, you can adjust the value of static color and strobe speed as you like
Press "ENTER" button and then up or DOWN button until
“
STAT COLOR
”
is showed
2 Press "ENTER" button, and there are six options. Then press ENTER to select the option and press UP
or DOWN button to select the value you desire as below:
1) STAT RED - You can adjust the red brightness in this menu
2) STAT GREEN - You can adjust the green brightness in this menu
3) STAT BLUE - You can adjust the blue brightness in this menu
4) STAT WHITE - You can adjust the white brightness in this menu
5) STAT AMB - You Can adjust the amber brightness in this menu
6) STAT UV - You Can adjust the purple brightness in this menu
7) SELET COLOR -You Can select 10 Static color in this menu
8) STAT STROB - You Can adjust the Strobe speed in thig menu
EDIT
-In this menu, you Can edit desired AUTO program
1 Press "ENTER" button and then up or DOWN button until
‘
EDIT' is showed
2 Press "ENTER" button, and open the "EDIT" mode to edit the Custom programs from "PR.01 " to
"PR
11”
And there are 32 scenes that can be edited in each custom program
3
You can edit a scene by adjusting the value of •RED (0
-
255)'. •GREEN (0
-255. "BLUE (0-255)",
WHITE (0-255), "AMBER (0-255)", "PURPLE (0-255), "FADE (0-31)", "FLASH (0-50), "STROBE
(0
—
31 ) & "TIME (0-100) as you like. Then the data Will be saved. When you press the ENTER button
for 5 seconds
UPLOAD
In this menu you can connect several pieces of lights With MAX cables and Set one light as
the MASTER and Others in SLAVE mode. Then upload the Custom in the MASTER light to the
lights in SLAVE mode
1 Press "ENTER' button and then up or DOWN button until UPLOAD' is showed
2 Press button to upload the custom from the MASTER light to the SLAVE ones
RESET
-In this menu, you Can reset all the value Of the system
1. Press "ENTER" button and then up or DOWN button until 'RESET" is Showed
2. Press the ENTER button to reset all the value Of the system
