(1) DMX means the light is in the DMX mode Similarly, SLAVE means the light is in the
SLAVE mode
(2) The color of the point shows the condition of signal transmission Green represents
the good condition, While red represents the signal is interrupted
(3) The item shows the working temperature of the light. When the working temperature
exceeds the max temperature, the color of the letters and number will change from white
to yellow
(4) This item shows the menu you selected
(5) This item shows the condition of key lock "Key lock open
”
means the key lock is
open And "Key lock off means the key lock is close
”
DMX
–
In this menu you can connect several pieces of lights with DMX cable and control them with
control console
1 Press ENTER button and then UP or DOWN until the DMX is showed
2 Press ENTER button, and CHANNEL or ADDRESS will be showed, then press ENTER.
1) *Channel [xx]" will be showed. "X" represents the showed DMX channel mode. You can press the
up or DOWN button Select desired Channel mode
2) "xxx" will be showed xxx represents the showed address You can press the UP or DOWN button to
select your desired address
RUN MODE
- In this menu. can select DMX mode or SLAVE mode In SLAVE mode you can select
one light as the light and other lights in SLAVE mode will run following the MASTER light
1 Press "ENTER
”
button and then up or DOWN button until "RIJN MODE" is Showed
2 Press "ENTER' button and
“
DMX" or "SLAVE" will be showed. then press ENTER to select your
desired mode
SET UP
- In this menu. you can adjust the value of the function
1 press "ENTER
”
button and then up or DOWN button until "SET UP" is Showed
2 Press "ENTER
”
button, and there will be nine options Then. Press ENTER to select the option and
press up or DOWN button to select the value you desire as below:
1) ID number - You can Select an ID in this menu Then, you Can adjust the Value Of Channel
11 to the corresponding scope and control the light individually with control console
2) Display Led - In this item you can select "ON" or "OFF" If you select ON the displayer will be on all
the time. And if you Select OFF, the displayer Will extinguish ten Seconds later
3) Key lock - You can select whether the password is on or off in this menu , and the password is [
DOWN) [ UP] •l DOWN ] [ UP] If you select “
on" then you have to input the password before
pressing the buttons Otherwise, the light respond to your
4) Max temp You can set the your desired Max working temperature about the light in this Menu.
When the working temperature of the light exceeds the Max temperature, the color of letter
xx" Showed in the menu Will Change from White to yellow Meanwhile, the light Will adjust the
working temperature automatically
5) Dimmer RED - You can adjust the red brightness in this menu
6) Dimmer GREEN You can adjust the green brightness in this menu
7) Dimmer BLUE You Can adjust the blue brightness in this menu
8) Dimmer WHITE - You can adjust the white brightness In this menu
9) Dimmer AMB - can adjust the amber brightness in this menu
10) Dimmer UV - You Can adjust the purple brightness in this menu
11) Dimmer ALL You can adjust the brightness of each color in this menu
INFORMATION
In this menu, you Can learn about the information Of software, hardware and the
working time of the light
1 press "ENT
ER”
button and then up Or DOWN button until "INFORMATION" is Showed
