8
Break In
During production every component for EDDIE is hand-selected. Drivers must perform
within parameters to match the production sample both electrically and sonically.
Crossovers are tested before installation. Each driver is tested prior to installation. And
when the speaker is complete it has a thorough visual check to make sure EDDIE is
looking good.
But that’s not enough. He has to perform. EDDIE goes through rigorous testing to assure
it matches the production sample. Then there are music tests.
A variety of music is tested at various output levels. This is part of the factory break-in.
This is where the midrange and tweeter level controls are set for flat response. Finally,
the ultimate reference is a trained ear. Besides specifications EDDIE musty pass real-
world listening.
When you receive EDDIE, you should begin lower listening levels progressing to higher
listening levels. After about 50 hours of use you will be hearing EDDIE at his best. (Please
review sections 5 and 12 before you continue break in.) During this period, you can
experiment with optimal placement and treatment of your listening environment. (See
Section 10.)
If you require any help – please contact EVOKE or your representative.
Summary of Contents for eddie
Page 1: ...OWNERS MANUAL ...
