manualshive.com logo in svg

evoheat Polaris LA 60, Installation And Instruction Manual

Share
Download
evoheat Polaris LA 60 Installation And Instruction Manual Download Page 22

20

19

Operation and Use

(1) tapping hot water mode icon 

, then the display will change to this mode interface;

①

(2) tapping heating mode icon 

, then the display will enter this mode interface;

②

(3) tapping cooling mode icon 

,then the display will switch to this mode interface;

③

Note: If what you have purchased is a heating-only model (without cooling function), 
           the "cooling" will not be shown on the interface.

(4) tapping hot water+heating mode icon 

, then the display will go into 

      hot water+heating mode interface;

④

(5) tapping hot water+cooling mode icon 

, then the display will come to

      hot water+cooling mode interface;

⑤

In the main interface, there are five modes can be selected after tapping the mode key

.

Take hot water + cooling mode for example:
Tapping 

, the wire controller back to main interface;

Tapping 

, the target temp of hot water can be set by pop-up keyboard;

Tapping 

, the target temp of cooling mode can be set by pop-up keyboard.

①
②
③

5.4 Setting of target temperature

①

②

③

Operation and Use

When the target temp is being set, pop-up keyboard is shown as following:

Key name

Key number

④

Key function

②

③

Tapping this key can back to 
the main interface.

Return key

Enter key

Delete key

Tapping this key to undo 
the last action.

Note: 

means the new target temp under current setting

①

①

②

③

④

Tapping this key can save you 
action and back  to the main 
interface.

5.5 Target temp setting 

Summary of Contents for Polaris LA 60





































Reviews:

No comments

Brands by name

Popular brands

Load more brands