1300 859 933
www.evoheat.com.au
Fusion-i Series Manual
Page 12
6.2.4 System Time Settings
Hold the
CLOCK
button for 2 seconds to enter the system time setting interface. Press the
CLOCK
again to adjust the
time. After the first press, the hour parameter will be flashing which means it can be changed, use the
UP
&
DOWN
arrow accordingly. Press the
CLOCK
button again to move to adjusting the minute digits using the same process.
Press the
CLOCK
button again to save and return to the main interface.
Under this menu, if there is no operation for 20 seconds the system will automatically memorise the settings and
return to the main menu. Press the
ON/OFF
button at any time during changes to exit without saving changes.
6.2.5 Timer Settings
6.2.5.1 Setting a Timer
The controller can be set up as a with two different timer periods: Timer ON1~OFF1; Timer ON2~OFF2.
Select ON1, OFF1, ON2 or OFF2 on the timer setting interface.
Press the
CLOCK
button to enter the timer setting interface. Press the
UP
or
DOWN
arrows to choose between ON1,
OFF1, ON2 or OFF2. To set the time, follow the same process as changing the system time to adjust values.
On at 9:20
NOTE: You You will need to set both an ON & OFF Time if using this function
