User Manual Rev 1.0
EVoInnovate EVSE User Manual & Installation Guide
www.evocharge.com
12
Figure 2-1 Installing the mounting bracket Figure 2-2 Screw holes of mounting bracket
Mounting Screw Recommendations:
a.
For finished walls supported by wood studs, use
1/
4” or
M6 tapping screws. (
Supplied
)
b.
For masonry walls, use M6 mechanical screws. (
Commercially available)
c.
Use following torque force:
Screw
Torque
M6
50 kgf.cm
43.4 lb-in
1/4”
50 kgf.cm 43.4 lb-in
4.
As shown in Figures 2-3 & 2-4, mount the charging station onto the mounting bracket and secure the lock screw.
3-1. Tighten the installed M4 screw and screw washer to fix charging station on mounting bracket.
3-2. Use following torque force:
Screw
Torque
M4
16 kgf.cm
13.88 lb-in