EVoCharge 30A EVoReel iEVSE, Installation Manual And User'S Manual

Page: 24 / 27

OPER
A
TIO
N
24
OPERATION – Enable Charging
1
3
1. Ready Indicator (Green Color) is
present once the charging unit is
ready to initiate vehicle charging.
2. To ENABLE charging, Swipe RFID Card
and retract charge cable to the desired
length and install charge connector
into vehicle charge port.
3. Charging Indicator (Blue Color) will
begin FLASHING once the vehicle is
charging and illuminates SOLID once
the vehicle is fully charged.
CAUTION: Extend and retract the charge
cable by applying force to the cable only;
do not apply force to the vehicle
connector.
NOTE: A red warning tag is applied to the
charge cable at the maximum
recommended cable extension length.
IMPORTANT: Once the charging unit
is connected to supply-power, turn-
on the charging unit by placing the
toggle switch towards the front of
the charging unit. The toggle switch
is located at the bottom of the
charging unit.
2