-6- Installation
The card should be done on a grounded anti-static mat. The
operator should be wearing an anti-static wristband,
grounded at the same point as the anti-static mat.
Inspect the card module carton for obvious damage.
Shipping and handling may cause damage to your module.
Be sure there are no shipping and handling damages on the
module before processing.
After opening the card module carton, extract the system
module and place it only on a grounded anti-static surface
component side up.
Again inspect the module for damage. Press down on all
the socketed IC to make sure that they are properly seated.
Do this only with the module place on a firm flat surface.
Note:
DO NOT APPLY POWER TO THE CARD IF IT HAS
BEEN DAMAGED.
You are now ready to install your PCI-16P16R
