EVOC P15 Series Manual Download Page 121

Page: 121 / 130

BIOS Setup (Applicable to ECS-1841

motherboard)

· 112 ·

P15 SERIES

Note: USB can be used in EFI application, such as in Shell.



EVOC Features

This option provides configuration of EVOC special functions (“FMI” for hort).



FMI Configuration

The general switch of FMI function, used to control whether EVOC Features are

supported.



Time Record Support

This option is used to record the operation time of motherboard.



eDisk Support

This option is used to enable or disable eDisk.



eLogo support

This option is used to change bootup Logo. Only when eDisk Support is enabled, can

this function be realized. The format of LOGO image must be BMP, and the file name

must be LOGO.BMP.



Special Boot Order Configuration

This option provides EVOC special boot order configuration.

Summary of Contents for P15 Series



































































































































Search results

Summary of Contents for P15 Series

Reviews:

Brands by name

Popular brands

EVOC P15 Series, Manual

Search results

Summary of Contents for P15 Series

Reviews:

Brands by name

Popular brands