manualshive.com logo in svg

EVOC P15 Series, Manual

Share
Download
EVOC P15 Series Manual Download Page 108

 

BIOS Setup (Applicable to ECS-1840

 

motherboard)

 

 

P15 SERIES 

· 99 · 

 

 

Intel IGD Configuration 

 

 

GOP Driver 

This option is used for Win8 VBIOS. 

 

Integrated Graphics Device 

Onboard integrated graphics option.If external PCI graphics card needs to be 

connected,this option must be Disabled,otherwise there would be contradiction.

 

 

IGD Turbo Enable 

Switch for integrated graphics device turbo boost technology function. 

 

Primary Display 

Set the onboard primary display to integrated graphics card or discrete graphics car 

[Auto/IGD/PCIe/SG]. 

 

GFX Boost

 

This option is a switch for graphics card GPU Turbo boost function. 

 

PAVC 

This option is audio, video protection control switch. When this technology is enabled, 

the whole transmission and playing process of audio and video are protected. Please 

note that if Blue-ray disk is played, this option must be enabled. 

 

DVMT Pre-Allocated 

Summary of Contents for P15 Series



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands