Software Introduction
· 30 ·
NPC-8208
system.
If users need to uninstall the eDisk driver program, click “Control Panel” in Windows,
enter into “Add/Remove Program” and find eDisk driver program, click “Uninstall
Program” button to uninstall eDisk driver program according to uninstallation
program guide. After the uninstallation is finished, reboot the system.
6.4.3 Using Method of eDisk under Windows
After eDisk driver program is installed and system is rebooted, users can see “Local
Disk (Z)” in “My Computer”, which is eDisk. Users can carry out operations for the
partition (only supports FAT file system) in the same way they do for common hard
drive, such as “Formatize”, “Copy”, “Stick” and “Delete”, etc.
6.4.4 Using Method of eDisk under Linux
Because different systems have different kernel versions, if eDisk driver needs to be
used in Linux system, following three steps must be executed:
4.
Compile driver:
make clean
make
5.
Load driver:
insmod oem_driver.ko
6.
Mount device:
mount /dev/ramdisk /mnt
afterwards, read/write can be carried out for /mnt menu.
If formatization is needed before Step 3, following commands can be executed:
