BIOS Setup
EC3-1820V2NA
· 31 ·
Secure boot configuration submenu. This submenu can be used only when
Supervisor Password has been set.
Supervisor/User Password is
：
These two options are used to display password status of supervisor and
common user. When there is no password, Cleared will be displayed; If there is
password, “Set” will be displayed.
Set Supervisor/User Password
These two options are used to set passwords for supervisor and common user.
Press < Enter > to enter into setup interface.
Supervisor/User Hint String
These two options are used to set prompt information for supervisor and
common user respectively. They can be directly entered.
Min. Password length
To set minimum password length.
Authenticate User on Boot
To authenticate user on boot. When this option is Enabled, the user password
needs to be entered for each boot-up. When it is Disabled, the user password
needs to be entered during Setup, and this option needs to be set as Supervisor
Password.
HDD Password Select
Used to select HDD password authority. There are User Only/User+Master
options. These options are displayed only when a hard disk is connected.
HDD Security Status
Used to display HDD security information status. If no HDD is detected, “No
HDD” will be displayed. If HDD is detected, corresponding HDD Password
State and Set HDD User Password option will be displayed, which are used to
check HDD password state, and set up HDD password function.
