EVOC EC0-1816 Series, User Manual

Page: 126 / 128

Appendix
- 56 - EC0-1816(B) SERIES
however, the software developed by BPI only requires one set of the
maintenance software.
4) Low Cost
Developing the applications by BPI will not result in additional hardware and
software cost, but it will reduce the development difficulty, development cycle
and time-to-market for the system integrator.
5.2 FMI Overview
FMI (Firmware Management Interface) is a management software developed based
on BPI specification. Currently, FMI supports eLog, eDisk, eLogo, eOrder and
product SN management functions. For the details of its test program, please refer to
eManager software in the User Manual CD.
1) eLog
It keeps records for the use of computer, for example, the time for first bootup,
finish time of the test, factory time, time of each power-on/off, total times of
system power-on, times of illegal power-off, total online time of the PC, CPU
clock frequency. eLog management provides valuable information for failure
analysis and product upgrade.
2) eDisk
eDisk is a virtual disk device onboard, a floppy disk which can be loaded into
DOS system for system maintenance by default. Users can change the purpose
of eDisk based on actual needs, for example, storing user private data or EVOC
One-Button-Recovery system eBack software.
3) eLogo
It provides an effective, simple and reliable method for users to replace OEM
LOGO of computer. There is no need to customize BIOS. User only need to
place OEM LOGO into eDisk. When the PC is booted up or rebooted, BIOS
will automatically update OEM Logo for the user.
4) eOrder
It meets the needs of users of embedded PC for special boot order of the device.
It allows users to set special boot order of the device under BIOS Setup or
operating system.
5) Product SN management