EVOC EC0-1816 Series, User Manual

Page: 128 / 128

Appendix
- 58 - EC0-1816(B) SERIES
System reboots
automatically
1. Please make sure whether the CPU fan is operating normally;
2. Please make sure whether the reset button has been triggered
by accident;
3. Please make sure whether the system is affected by virus
using anti-virus software;
4. Please make sure whether the memory bank or the peripheral
card is loose;
5. Please make sure whether the loading capability of the
adopted power supply is enough; please try to replace the power.
No USB device
can be detected
1. Please make sure whether independent power supply is
required on the USB device;
2. Please make sure whether ill contact exists on the USB port;
3. Please make sure whether the USB controller in BIOS Setup
has been enabled.
No PCI card can
be detected
1. Please make sure whether additional power supply is needed
on the PCI card;
2. Please make sure whether the operating voltage of the PCI
card is in accord with that supplied by motherboard (5V by
default);
3. Please make sure whether the PCI slot can be identified after
replacement.
No ISA card can
be detected
1. Please make sure the resources used by ISA card have been
reserved by BIOS according to the ISA card manual. There are
reserving options in BIOS Setup for ISA used I/O or memory
resource on most of the motherboards; whether the IRQ used by
ISA card has been reserved in BIOS Setup;
2. The ISA card usually cannot be identified directly within
system; please choose “Add in Hardware” in the “Control Panel”
in Windows system to set.