Chapter 3 BIOS Setup
104-1649CLD2NA Series
- 23 -
Super IO Configuration
BIOS SETUP UTILITY
Configure SCH311X Super IO Chipset
Floppy A
[Disabled]
OnBoard Floppy Controller
[Enabled]
Serial Port1 Address
[3F8]
Serial Port1 IRQ
[IRQ4]
Serial Port2 Address
[2F8]
Serial Port2 IRQ
[IRQ4]
Serial Port3 Address
[3E8]
Serial Port3 IRQ
[IRQ3]
Serial Port4 Address
[2E8]
Serial Port4 IRQ
[IRQ3]
Allows BIOS to Enable or Disable
Floppy Controller
←→
Select Screen
↑↓
Select Item
+ - Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.57 (c)Copyright 1985-2004,American Megatrends, Inc.
Floppy A
Configuration of the floppy disk driver type.
On-Board Floppy Controller
Enable floppy disk controller.
Serial Port 1~4 Address
Set the addresses of COM1~COM4 on motherboard.
Serial Port 1~4 IRQ
Set the IRQs of COM1~COM4 on motherboard.
Parallel Port Address
Set the address of the parallel port on motherboard and its default value is 378.
Parallel Port Mode
Set the mode of the parallel port on motherboard.
Parallel Port IRQ
Set the interrupt of the parallel port on motherboard.