10
Parts List
Qty
Grill Assembly Components
1
Right Front Leg
1
Left Front Leg
1
Rear Leg
2
Leg Supports
( LP Only )
1
Removable Leg Support
( LP Only )
3
Leg Supports
( Natural Gas Only )
1
Lower Rack
1
Drip Pan
1
Waste Tray
1
Regulator / Hose Assembly
( LP Only )
1
Natural Gas Quick-Disconnect Hose
( Natural Gas Only )
Parts
Box
1
Fastener Package
1
Right Wheel Spacer
1
Left Wheel Spacer
2
Wheel
2
Spanner Bushing
2
Wheel Hub Plate
1
Hood Handle
1
Hood Support
1
Rear Grill Handle
2
Hose Clamp and Fasteners
( Natural Gas Only )
1
Thermometer with Securing Nut
1
Electronic Ignitor Battery (AA or AAA)
Tools
Included
1
Socket and “L” Handle
1
7/16” Open-End Box Wrench
Tools
Required
1
Phillips Screwdriver
1
Hammer
1
Small Block of Wood (Approx. 2” x 4” )
Literature
Bag
1
Install Instructions & Owners Manual
1
Use & Care Manual
Qty
Key
Legs to Lower Rack
6
10
1/4” - 20 x 1/2” Phillips Screw - Stainless Steel
6
11
1/4” - 20 Nyloc Nut - Stainless Steel
Wheels to Lower Rack
2
20
3/8” x 7/8” - Flat Washer - Stainless Steel
2
21
3/8” Nyloc Hex Nut - Stainless Steel
6
22
8 x 3/8” Phillips Screw - Stainless Steel
Leg Supports to Leg Frame
8
30
1/4” - 20 x 1/2” Phillips Screw - Stainless Steel.
Note: On LP models, 8 screws connect two leg supports.
The third removable key-way leg support uses pre-installed
hardware.
12
30
1/4” - 20 x 1/2” Phillips Screw - Stainless Steel.
Note: On Natural Gas models, 12 screws are required for
connecting all three leg supports to leg frame. Removable
leg support not used on Natural Gas models.
8
31
1/4” - 20 Nyloc Nut - Stainless Steel.
Note: On LP models, 8 nyloc nuts are required for connect-
ing all two leg supports to leg frame. The third (right-most
from front of grill) is a removable (keyed) support.
12
31
1/4” - 20 Nyloc Hex Nut - Stainless Steel.
Note: On Natural Gas models, 12 nyloc nuts are required
for connecting all three leg supports to leg frame.
Leg Frame Assembly to Burner Unit
6
40
1/4” - 20 x 1/2” Phillips Screw - Stainless Steel
6
41
1/4” - 20 Nyloc Hex Nut - Stainless Steel
Drip Pan to Burner Unit
3
50
1/4” - 20 x 1/2” Phillips Screw - Stainless Steel
3
51
1/4” - 20 Nyloc Hex Nut - Stainless Steel
Rear Handle to Burner Unit
2
60
1/4” - 20 x 1/2” Phillips Screw - Stainless Steel
2
61
1/4” - 20 Nyloc Hex Nut - Stainless Steel
Hood Handle and Hood Support
2
70
1/4” - 20 x 5/8” Phillips Screw - Stainless Steel
2
71
1/4” Lock Washer
2
72
1/4” - 20 Hex Nut
Hood
Thermometer
1
80
Evo Thermometer - Stainless Steel
1
81
1/4” NPT Securing Nut - Nickel Plated Bronze
Natural Gas Hose to Rear Leg
( Natural Gas Only )
2
100
5/8” Stainless Steel Hose Clamps
Screw / Nut Combination Included
You may have extra hardware after completing as-
sembly of your grill. This is normal, as in some cases
we have included extra hardware to ensure you have
enough.
Fastener Package Listed in Order of Assembly Group
