Evo FX4M User Manual Download Page 2

 

 

 

FX4M MOTORIZED TREADMILL 

 

Visit us at: 

www.evofitness.com

 

2

PRECAUTIONS 

 

For future service or related questions

 
Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth 
Fitness treadmill.  
 
Name: ______________________________ Phone Number: ___________________ Receipt: ______________________ 
 
 

Precautions

 

WARNING

: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and 

information before operating the treadmill.  It is the responsibility of the owner to ensure that all users of this treadmill are 
adequately informed of all warnings and precautions. 
 

??

Use the treadmill only as described in this manual. 

 

??

Place on a level surface, with 6 feet (2 m) of clearance behind it.  Do not place the treadmill on any surface that 
blocks air openings.  To protect the floor or carpet from damage, place a mat under the treadmill. 

 

??

When choosing a location for the treadmill make sure that the location and position permit access to a plug. 

 

??

Keep the treadmill indoors, away from moisture and dust.  Do not put the treadmill in a garage or covered patio, or 
near water. 

 

??

Do not operate the treadmill where aerosol products are used or where oxygen is being administered. 

 

??

Keep children under the age of 12 and pets away from the treadmill at all times. 

 

??

The treadmill should not be used by persons weighing more than 350lbs. 

 

??

Never allow more than one person on the treadmill at a time.  Wear appropriate exercise clothing when using the 
treadmill.  Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are 
recommended for both men and women.  Always wear athletic shoes. Never use the treadmill with bare feet, 
wearing only stockings, or in sandals. 

 

??

When connecting the power cord, plug the power cord into a grounded circuit.  No other appliance should be on the 
same circuit. 

 

??

Always straddle the belt and allow it to start moving before stepping onto the belt. 

 

??

Always examine your treadmill before using to ensure all parts are in working order. 

 

??

Allow the belt to fully stop before dismounting. 

 

??

Never insert any object or body parts into any opening. 

 

??

Follow the safety information in regards to plugging in your treadmill.       

 

??

Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill.  Do not 
operate the treadmill with a damaged or frayed power cord. 

 

??

Always unplug the treadmill before cleaning and/or servicing.  Service to your treadmill should only be performed by 
an authorized service representative, unless authorized and/or instructed by the manufacturer.  Failure to follow 
these instructions will void the treadmill warranty.     

 

??

Never leave the treadmill unattended while it is running.

 

Summary of Contents for FX4M

































Reviews: