background image

 

19

C O L D   S U R FA C E

e v o

-

CENTRIC  20E

REVISION 4.0

TURN UNIT ON

Press ON button for 1 second

TURN UNIT OFF

Press OFF button for 1 second

H O T   S U R FA C E

H O T   S U R FA C E

T

O

EDGE     EDGE

100

o

F

S E T

T E M P E R A T U R E

H O T   S U R FA C E

T

O

EDGE     EDGE

325

o

F

A C T U A L

T E M P E R A T U R E

EDGE to EDGE SET TEMPERATURE

Default mode after power ON

EDGE to EDGE ACTUAL TEMPERATURE

Press MODE button for 1 second

H O T   S U R FA C E

INNER FOCUS

100

o

F

S E T

T E M P E R A T U R E

H O T   S U R FA C E

INNER FOCUS

325

o

F

A C T U A L

T E M P E R A T U R E

INNER FOCUS SET TEMPERATURE

 

Press MODE button for 4 seconds to switch 

between EDGE to EDGE and INNER FOCUS

INNER FOCUS ACTUAL TEMPERATURE

Press MODE button for 1 second

IMPORTANT SAFEGUARDS

1)  Read Manual carefully before using this appliance.
2) Do not touch hot surfaces and always use utensils when 

cooking on this appliance.

3) To protect against electrical shock, do not immerse cord, 

plugs, or place this appliance in water or other liquid. Do not 
handle this appliance or its parts with wet hands.

4)  Unplug this appliance when not in use. 
5)  Unplug and allow this appliance to cool before cleaning .
6)  Do not allow power cord to touch hot surfaces.
7)  Use extreme caution when moving this appliance.
8)  Place this appliance on a steady and level surface.

SETUP and OPERATION

1)  Only connect this appliance to a 120V, 20AMP, 1-PHASE, 

50-60Hz electrical outlet using the supplied NEMA 5-20P 
electrical cord.

2)  Allow this appliance to preheat to a set temperature for 10 

minutes before placing food on the cooking surface.

3)  For in-direct cooking with pots or pans and for demanding 

cooking requirements, use the INNER FOCUS mode. 

4)  Only use the supplied grill cleaning pads, grill cleaning 

screens, and vegetable oil to clean cooking surface. 

 

Do not use a pumice brick on cooking surface.

 

Do not deglaze cooking surface with water.

5)  Clean chassis with a damp cloth using soap and water. 

R

- CAUTION -

NEVER LEAVE THIS APPLIANCE UNATTENDED

WHEN IN OPERATION

Evo, Inc. 8140 SW Nimbus Ave., Bldg. 5, Beaverton Oregon 97008  USA   Ph 503-626-1802   www.evoamerica.com

- CAUTION -

DO NOT IMMERSE APPLIANCE IN WATER

OR SPRAY WITH WATER OR LIQUID CLEANERS

Quick Start Instruction Guide

Summary of Contents for Centric 20E Electric




















Reviews: