14
Centric 20E Control Panel
Basic Features
Pressing the round button located above the ON/OFF label toggles between power ON and
power OFF. When the unit is ON, a green light illuminates above the ON/OFF label indicating
the unit is active. Pressing the ON/OFF button a second time powers OFF the unit and cancels
previous settings.
When the unit is fi rst powered ON, a system check is performed and the window displays the
Centric revision information as shown above.
ON/OFF
Pressing the blue UP arrow when the unit is powered ON increases the cooking surface
temperature (as indicated in the display window). The UP arrow is also used to control setup and
programming of optional features.
The default MODE is the SET temperature mode. Pressing the MODE button for one second
displays the ACTUAL temperature of the cooking surface. Pressing and holding the MODE
button for three seconds switches the cooking surface temperature control between EDGE to
EDGE and INNER FOCUS heat zones.
MODE
C O L D S U R FA C E
e v o
-
CENTRIC 20E
REVISION 4.0
Pressing the blue DOWN arrow when the unit is powered ON decreases the cooking surface
temperature (as indicated in the display window). The DOWN arrow is also used to control setup
and programming of optional features.
INNER FOCUS mode provides temperature control focused at the center zone (inner 10”
diameter) of the cooking surface. When INNER FOCUS mode is selected, priority is given to
high temperatures and fast recovery of the cooking surface inner zone.
INNER FOCUS
HOT SURFACE is illuminated as a safety feature to indicate when the cooking surface
temperature is in excess of 100°F (38°C).
HOT SURFACE
COOL SURFACE is illuminated when the unit is connected to power and when the cooking
surface temperature is below 100°F (38°C).
COOL SURFACE
EDGE to EDGE mode (default mode) provides temperature control across the entire cooking
surface. When EDGE to EDGE mode is selected, heat is applied equally to both the inner and
outer cooking surface zones.
T
O
EDGE EDGE
EDGE EDGE
