Evo Aeroneb Go Instruction Manual Download Page 2

1

18

INTRODUCTION

Be sure to read these instructions completely before use.

Thank you for purchasing the Aeroneb

®

Go Nebulizer.

Certain conditions such as asthma, COPD (chronic obstructive 
pulmonary disease) and cystic fibrosis require that prescribed
liquid medication be turned into a fine mist, called an aerosol,
and then inhaled into the lungs. The Aeroneb

®

Go turns liquid

medication into an aerosol, which you can then inhale through
a mouthpiece or an aerosol mask into your lungs.

The Aeroneb

®

Go uses the unique OnQ

Aerosol Generator,

which is unlike any other nebulizer technology available. When
you turn on your nebulizer, OnQ pumps liquid through tiny
holes in a wafer-thin metal plate to create a soft mist aerosol.

The Aeroneb

®

Go, for use by pediatric and adult patients, is 

intended to aerosolize physician-prescribed solutions for 
inhalation that are approved for use with a general-purpose
nebulizer. Designed with your needs in mind, the Aeroneb

®

Go is lightweight, compact and silent. The control module 
operates with three (3) "AA" disposable batteries, or can 
alternatively be powered by the AC/DC Adapter or AC
Controller.

CAUTION:

Federal law restricts this device to sale by or on the

order of a physician.

Operate this unit only as instructed by the Aeroneb

®

Go

Instruction Manual. Thoroughly read and understand the 
information contained in these instructions before using the
Aeroneb

®

Go.

For future reference, SAVE AND REFER TO THESE INSTRUCTIONS.

REPLACEMENT PARTS AND ACCESSORIES

PART REORDER 

NUMBER

7000

Battery Controller with Cable 

21105

7030

Wall Mount Adapter* 

21099

7070

Battery Controller with Cable 

21105

Wall Mount Adapter* 

21099

7090

Battery Control Module 

22213

AC/DC Power Adapter

22215

REPLACEMENT PARTS AND ACCESSORIES FOR ALL MODELS

Medication Cup Cap 

22210

MicroPump with Chamber, Mouthpiece, Reservoir and Cap  22218
Nebulizer Body 

22207

Mouthpiece 22205
Battery Powered Controller Cable 

22201

Mask Connector Elbow (US) 

22203

Dragon Mask

1010M

Carrying Case 

29049

“AA” Battery, each

21120

Instruction Manual* 

22263

PEDIATRIC ACCESSORIES, PACKAGED SEPARATELY

Safari Sam Color Book Kit, each

22316

Safari Sam Color Book Kit, 12/pack

22317

To order replacement parts or accessories, visit your local home

medical equipment dealer or pharmacy.
*Contact your local supplier for reorder number specific for your

geographical region.
If you have any questions or problems regarding your Aeroneb

®

Go nebulizer, contact your local home medical equipment 

dealer or pharmacy.
Your Aeroneb

®

Go was tested and inspected at the factory and is

a premium device that has a life expectancy of at least one year

(730 treatments) with proper care and cleaning. Lack of proper

care and cleaning, disassembly of the retaining ring or misuse 

will void the warranty.

Summary of Contents for Aeroneb Go











Reviews: