E.PACKAGE CONTENTS
Your EVO Powerboard comes with the following items in the box.
Please locate all of the following:
1. The EVO Powerboard
2. Allen Wrench
3. Owner’s Manual
4. Seat Post (Optional)
F.GETTING STARTED
Please read and understand these instructions and the OPERATING PROCEDURES
section, prior to starting or riding your EVO Powerboard!
1.
Carefully remove the EVO Powerboard from
the box.
2.
To unfold the EVO Powerboard, begin by
pressing down on the FOLDING HANDLE with
one hand (Fig. 1), while gently pulling up on the
handlebar post with the other (Fig. 2).
3.
Fully extend the handlebar post to the upright
position until you feel the mechanism lock into
place (Fig. 3).
4.
Detach the handlebar from the post and mount
the handlebar onto the post using the bolts
provided.
5.
Adjust the Gas and Brake Levers using the provided
Allen Wrench, loosen the tension bolt and adjust
the levers to a comfortable position (Fig4).
*BE CAREFUL NOT TO PULL ON THE CABLES
AND ENSURE THEY ARE ROUTED THE SAME
AS IN FIG 4!!!
Fuelling
This is a 2-stroke engine. Always run the engine
using fuel, which is mixed with 2-cycle engine oil.
PLEASE READ OPERATING PROCEDURES
BEFORE FUELLING!!
6.
Mix fuel (minimum 93 octane) and 2-cycle engine
oil in separate container. Use between 40:1 and
60:1 oil mixture ratio depending on quality of fuel
in your area. (Refer to Fuel Guide on page 8).
Make sure the fuel is well mixed by shaking the
container.
7.
Make sure that the engine is off!
8.
Slowly open the GAS CAP, so that possible over-
pressure disappears.
Unfolding
5
Fig. 1
Fig. 2
Fig. 3
www.evopowerboards.com
E. P
ACKAGE CONTENTS
F.
GETTING ST
AR
TED
