9
11.
Lower both front and rear axles (one at a
time) while checking wire and hose lengths
until springs can be removed.
Adjust wire and hose connections as needed.
12.
Remove springs
13.
Remove upper control arms from frame and
axle and set aside. Axle will be loose at this
time use caution and appropriate support.
Repeat on rear arms.
Be careful when removing control arms. Axle
may rotate downward due to off centered
weight, support pinion if necessary.
14.
Carefully Support underside of gas tank.
Remove all bolts holding it to chassis.
Carefully lower tank (remember there is fuel
BE CAREFUL) until you can reach
connections on top of tank and disconnect.
Set tank aside in a safe well vented space
away from any flames/heat. It will be
reinstalled later.
