21
Reinstall wheels and tires, lower to ground.
Once vehicle is on the ground, set
pinion angle on vehicle so that the
driveshaft and the pinion are inline
with the axle at an approximate ride
height and centered to vehicle.
RECENTER STEERINGWHEEL/FUNCTION CHECKS:
Adjusting Turn buckle on Draglink. Make sure to turn the correct way to center (do not do a full
rotation of steering wheel, closest direction to straight, watch wheel while turning) and pinch nuts
once straight. You may need to do this more than once after a drive to get it straight to your liking.
Test brakes and verify no leakage in lines before driving. Recheck often. Removal or trimming of
factory plastic inner fender liner may be required to clear combinations of larger tire sizes and wheel
back spacings. Check for acceptable clearance. Retorque all bolts after 500 miles.
