7
4.
Using supplied hardware attach
Stinger to the top of the Bumper.
After Install:
o
Tighten all bolts securing purchased parts to specified locations.
o
After completing installation using provided instructions, go through all steps again to make sure
nothing was missed, not tightened or improperly assembled.
o
Some components may need to be purchased separately.
o
Check turn signals, headlights, fog lights (if applicable), taillights, blinkers and windshield wipers.
o
Adjust mirrors, speedometer and headlights if needed.
o
Make sure all gauges are fully operational.
o
Drive the vehicle slowly for a couple minutes, looking and listening for abnormal noises while
driving. After modification of a vehicle there will be differences in driving experiences and
capabilities, be mindful of that.
o
Inspect and Retorque all Bolts after 500 miles of competed installation and regularly thereafter.
o
Some modification may be required.
