Press the Configuration tab icon.
Press the Backlight icon.
Use the arrow icons to adjust the backlight in 10% increments from 10% to 100%.
Backlight level remains in memory when the display is shut OFF.
•
Navigational Light Input –
This input is a blue-colored wire located on the display’s
wiring harness. Connect this wire to the vessel’s navigation light switch. Turn the
navigation light switch ON to adjust the backlight level of all network components to
10%.
The display will switch to night mode graphics to enhance night vision.
•
Remote Control Selected –
Use the remote control(s) in the system to adjust
backlighting in 10% increments from 10% to 100%. See the remote control user’s guide
for directions.
Configuration tab icon
Backlight icon
Arrow icons
356596-17
32
Summary of Contents for ICON Touch 7.0 CTS
