Evinrude ICON Touch 7.0 CTS, User Manual

Page: 27 / 44

Fluid Tanks
Control Head Inputs:
There are four control head fluid level inputs. Their connections are located on the remote
control wiring harness. These inputs connect to a fuel level or oil level sending unit.
The tank fill choices are Fuel and Oil.
In the Calibrations feature, touch the Fluid Tanks tab icon to set the Fluid Tanks Calibrations.
Touch the Control Heads icon on the left side of the screen.
Touch the Reconfigure icon in a selected Control Head (CH) Tank to assign the tank to a
specific fluid type and tank capacity.
Touch the Calibrate icon in a selected CH Tank to assign calibration points to measure the
fluid level in the tank.
Follow the pop-up menu instructions on the screen. In the example below the input source
selection is Control Heads. Repeat in each Control Head Tank (CH Tank) as equipped in your
application.
FLUID TANKS icon
Control Heads icon
Reconfigure icon Calibrate icon
356596-16
23