30
Using Your E-TEC Outboard
ROUTINE INSPECTION CHECKLIST
Pre-Launch Checks (Each Use)
Periodic Checks
Check fuel level.
Check oil level.
Check function of steering, throttle, shift, and emergency stop circuit and lanyard.
Check condition of propeller.
Confirm operation of engine monitor system self-test and warning horn.
Confirm the cooling system is operational (water intake screens and water pump
indicator).
Confirm this Operator’s Guide is onboard and readily accessible.
Check condition of anti-corrosion anodes (annually or every 100 hours).
Check for debris on propeller shaft (requires propeller removal).
Clean and wax upper and lower engine covers (annually or every 100 hours).
In salt water applications, check lubrication points and corrosion protection. Use
Evinrude
anti-corrosion spray or
Evinrude
“6 in 1” multi-purpose lubricant (annually or
100 hours).
Summary of Contents for E115DBXSE
