Evinrude 30 HORSEPOWER MFE, Operator'S Manual

Page: 24 / 60

22
Using The Evinrude MFE Outboard
TILTING AND TRIM
TILT UP
Move the tilt/run lever to TILT position.
Grasp the tilt grip on engine cover and tilt out-
board to the full tilt position.
IMPORTANT: Use the tilt grip to tilt your out-
board. Do not use the tiller handle as a lever.
The tilt support bracket will automatically en-
gage.
TILT DOWN
Move tilt/run lever to RUN position.
Grasp the tilt grip on engine cover and raise
outboard slightly. The tilt support will automat-
ically disengage. Slowly lower outboard to its
normal operating (RUN) position.
Operate outboard in normal
operating position with tilt/run lever in the
RUN position.
1. TILT position 007022
1. Tilt grip
007023
1
1
1. Tilt support bracket 007025
A
WARNING
Leave tilt/run lever in the TILT position
while outboard is tilted. If the tilt/run
lever is moved to the RUN position, the
tilt support bracket can release and the
outboard could drop down unexpect-
edly.
1. RUN position
007024
1
1
NOTICE